Rubberized Undercoat B2200
BERKEBILE 2+2® RUBBERIZED UNDERCOAT stretches to ensure protection in areas where other products become brittle and crack. Excellent for autos, trucks, motorcycles, farm equipment, gutters, driveway cracks, and tree wounds.
- - STRETCHES TO ENSURE PROTECTION!
- - PROTECTS AGAINST RUST, FUMES, DUST, HEAT, AND COLD!
- - WITHDRAWS WATER TO ENSURE THE BEST POSSIBLE PROTECTION!
- - IT CAN EVEN BE PAINTED!
Directions for Use
For proper spraying, the can should be at room temperature (about 720 F. / 220 C.). For best adhesion, use BERKEBILE 2+2® SPRAY DEGREASER CONCENTRATED to the clean area to be undercoated, which should be clean, dry, and free of dirt, oil, grease, wax, etc. Shake the can until mixing balls rattle freely inside, then continue shaking for about 5 seconds longer. Remove the protective cap. Hold the can upright with a spray button about 12” to 14” (1/3m) from the surface. Press firmly on the spray button and move the spray can around continually. Use a side-to-side, up-and-down, or circular motion to apply a thin, even coating over the surface. To reduce running and sagging, apply several thin coats, allowing 15 minutes of drying time between coats. To prevent clogging of the spray button, turn the can upside down after use and spray until only vapor comes out.
*Always use in a well-ventilated area.